Whats are the variables that go into determining what cmd_vel move_base will output. I have a robot thats capable of 4m/s but during autonomous navigation the maximum that it ever chooses to go is 0.75m/s.
Here is my current understanding.
**min_vel_x** and **max_vel_x** bound the possible cmd_vel that move_base will output
I also read somewhere that **gdist** will also affect cmd_vel but in testing I have tweaked this value a lot using rqt_reconfigure and it doesn't show a noticeable difference.
Are there any other parameters that I can tweek in order to make my robot move closer to its full speed (just talking about x direction)?
TrajectoryPlannerROS:
max_vel_x: 4.0
min_vel_x: 0.4
max_vel_theta: 3.0
min_vel_theta: -3.0
min_in_place_vel_theta: 1.0
acc_lim_theta: 6.0
acc_lim_x: 6.0
acc_lim_y: 6.0
yaw_goal_tolerance: 0.3
xy_goal_tolerance: 0.5
sim_time: 1.0
sim_granularity: 0.025
angular_sim_granularity: 0.025
vx_samples: 3
vtheta_samples: 20
controller_frequency: 20
# Cost Function Parameters
# cost = pdist_scale * (distance to path from the endpoint of the trajectory in map cells) + gdist_scale * (distance to local goal from the endpoint of the trajectory in map cells) + occdist_scale * (maximum obstacle cost along the trajectory in obstacle cost (0-254))
# Local cost map resolution: 0.05 meters/cell
pdist_scale: 0.6
gdist_scale: 0.3 # Also controls speed
occdist_scale: 0.01
dwa: true
publish_cost_grid_pc: true
prune_plan: false
holonomic_robot: false # Robot cannot move sideways without turning first
↧